Metal zip ties and PG threaded cable glands online store? Our ATEX accessories meet the requirements of the European Directive 94/9/EC as required. Here, too, you can choose from a wide range of lock nuts, extensions and reductions as well as seals. In addition, we offer adapter elements and special clamping brackets for our ATEX Ex d/e cable glands to achieve an additional external strain relief.
Metal cable glands are used in a range of applications, including the chemical industry, technology and areas with high demands on special mechanical and chemical stability. The pros are durability over time, even in wet conditions, and its rigid stability. Plastic cable glands have a wide cable range due to their claw and seal design, which makes them extremely adaptable to a wide range of applications. The pros are resistance to salt water, grease and weak acids, to name a few.
Pg thread form of a German conduit pipe thread (DIN 40430) Unit: mm The screw thread referred to as a Pg 13.5 is a German DIN standard 40430 conduit pipe thread type. The thread angle is an 80 ° included angle and is similar to the JIS standard JIS C 8305 for thin steel conduit threads. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Telecommunications glands : Designed for used with communications cable or conduit. Read extra details at PG Cable Gland.
This feature also facilitates remote make off procedures when the cable termination is to be conducted in confined spaces or in areas of restricted access. Separate tightening actions for the inner displacement seal and the armour termination affords maximum control over the pressure applied to the cable inner bedding.
What is a Barrier Gland? Barrier glands are similar to normal glands, except a compound sealant material is used to ensure the inside of the cable is gas tight as well as the outside. When Should a Barrier Gland be Used? BS EN60079-14 Electrical Apparatus for Explosive Gas Atmospheres Part 14 – Electrical Installations in Hazardous Areas (other than Mines) provides a selection process for deciding if a barrier gland is required. There are various options to consider, however if the hazardous gas require IIC apparatus, or if the volume of the enclosure is greater than 2 litres then it is likely you will need to use a barrier gland. IIC apparatus is generally associated with Hydrogen.
CableGlandsOnline.com offer a wide selection of cable glands and cable ties to fit your needs. All of our cable glands meet IP68 specifications as liquid tight and are resistant to low level acides and alkalis. These cable glands are also designed for install well. Here are you can find a full sizes of all kinds of cable glands. Whether your application requires metric, npt or pg or other applications. You will find what you need here. Source: https://cableglandsonline.com/.