Top induction heating equipment supplier? An important feature of the induction heating process is that the heat is generated inside the object itself, instead of by an external heat source via heat conduction. Thus objects can be heated very rapidly. In addition there need not be any external contact, which can be important where contamination is an issue. Induction heating is used in many industrial processes, such as heat treatment in metallurgy, Czochralski crystal growth and zone refining used in the semiconductor industry, and to melt refractory metals that require very high temperatures. It is also used in induction cook-tops for heating containers of food; this is called induction cooking.
It’s a common misconception that induction heaters don’t work for aluminum and other non-ferrous metals. This is not true. This induction heater will heat up aluminum and copper just fine, but not as fast as ferrous metals. This is mainly due to their lower resistivity. The higher the resistivity of the conductive material, the more it generates heat when current is passed through it. The higher resistivity of most ferrous metals coupled with the heating due to hysteresis makes them ideal for induction heating, but they are not the only metals affected by induction.
MYF melting furnace is designed for Non-ferrous metal melting. Which is used for copper, aluminum, zinc, tin and lead melting. The induction power is 40KW-600KW. The induction heating power and melting furnace are equipped with water cooling system. The air cooling ones will need customization. The graphite crucible furnace capacity is 100-1000kg copper or equivalent. In general, it will cost 300-350KW*H electric power to melt 1MT aluminum. The input power is 3 x 380V, 50/60HZ. Air cooling or water cooling induction melting furnace. More saving for the electrical power. Easy to operate and more stable for 24 hours working. Find additional information at induction heating machine.
Induction is particularly good at case hardening. This is because of the skin effect discussed in the next step. The same high frequency skin depth that is seen in the working coil is also seen in the part being heated. The higher the frequency, the more the current is flowing on the outside of the material. For steel in this case, the current is only flowing about 6 thousandths of an inch deep. This is perfect for case hardening. This process should only be used with low carbon steel so I’ll show you a way to determine what type of steel you have.
Qingdao Shuimu Induction Equipment Co., Ltd is a professional induction heating equipment manufacturer in Qingdao City, China from 1999. Our induction weld preheating PWHT machine specializes in Metal Weld Heating, post Weld Heat Treatment(PWHT), thermal Assembly, fluid Heating and Non-ferrous Metal Melting Furnace design and manufacture. The induction weld preheating PWHT machine is air cooling with DSP + PLC control. Can set the heating temperature, heating speed and cooling speed. MYF Melting Furnace is designed for Non-ferrous Metal Melting. Which is used for Copper, Aluminum, Zinc, Tin and Lead melting. The power size is 40KW-600KW. Find additional information on https://www.cmheat.com/.