Category: Industrial

Premium induction heating equipment supplier? Induction heating is the process of heating an electrically conducting object (usually a metal) by electromagnetic induction, through heat generated in the object by eddy currents. An induction heater consists of an electromagnet and an electronic oscillator that passes a high-frequency alternating current (AC) through the electromagnet. The rapidly alternating magnetic field penetrates the object, generating electric currents inside the conductor, called eddy currents.

It’s a common misconception that induction heaters don’t work for aluminum and other non-ferrous metals. This is not true. This induction heater will heat up aluminum and copper just fine, but not as fast as ferrous metals. This is mainly due to their lower resistivity. The higher the resistivity of the conductive material, the more it generates heat when current is passed through it. The higher resistivity of most ferrous metals coupled with the heating due to hysteresis makes them ideal for induction heating, but they are not the only metals affected by induction.

MYF melting furnace is designed for Non-ferrous metal melting. Which is used for copper, aluminum, zinc, tin and lead melting. The induction power is 40KW-600KW. The induction heating power and melting furnace are equipped with water cooling system. The air cooling ones will need customization. The graphite crucible furnace capacity is 100-1000kg copper or equivalent. In general, it will cost 300-350KW*H electric power to melt 1MT aluminum. The input power is 3 x 380V, 50/60HZ. Air cooling or water cooling induction melting furnace. More saving for the electrical power. Easy to operate and more stable for 24 hours working. Discover more details on induction heating equipment suppliers.

Induction is particularly good at case hardening. This is because of the skin effect discussed in the next step. The same high frequency skin depth that is seen in the working coil is also seen in the part being heated. The higher the frequency, the more the current is flowing on the outside of the material. For steel in this case, the current is only flowing about 6 thousandths of an inch deep. This is perfect for case hardening. This process should only be used with low carbon steel so I’ll show you a way to determine what type of steel you have.

Weld preheating machine SMD-300 is widely used for weld preheating, ship building weld preheating, field joint coating, shrink fitting, heating removing and so on. Induction weld preheating PWHT Machine SMD-700 is used for pipe PWHT, stress reliving, weld preheating with temperature 0-700 C Induction weld preheating PWHT Machine SMD-900 is used for P91, P92, pipe PWHT, stress reliving, weld preheating with temperature 0-900 C The induction weld preheating PWHT machine is air cooling with DSP + PLC control. Can set the heating temperature, heating speed and cooling speed. See additional information at https://www.cmheat.com/.

MIG welders and welding advices? The people behind Display4top market this particular model as a professional MIG welder and we can’t say that they make a poor case in that regard. For one, its duty cycle is definitely up there. With its 48A rated output, the model is able to work for 6 minutes straight before overheating. It comes equipped with a variable wire speed control trigger, so you’ll be able to efficiently work with different metals. There are two power settings and an Ampere knob, further making the versatility case. More importantly, the model is as durable as they come. The forced air cooling system keeps the temperature at a nice, practical level. On top of that, the welder incorporates a thermal overload protection system that will be able to pick up the former’s slack in case it fails to do its job.

How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!” See additional details at Welding equipment Ireland.

Many companies get completely “bogged down” in the paperwork required to run a business. But with today’s latest technological advances, there are items that can be a great help. For instance, Lincoln Electric offers something called ArcWorks software which can document procedures, create drawings everyone in the shop can access, keep track of welding operator’s qualifications, and many other things. Software such as this can be tailored to the individual company’s needs and provide great efficiencies and also eliminate mistakes. Adding Robotics or Hard Automation to the Operation: Today’s technological advances offer many options. Robotics can be justified when the volume of parts a company produces is so great that it can offset the monies spent on a robot. Robotics can also be considered if there are a number of different parts that are similar enough in nature to be able to be handled by the same robot. If robots are not justified, a company might determine that fixturing or hard automation could be used to increase efficiency or quality. One company incorporated fixturing and clamps to hold down a tank while the seam was being welded. In another case, an automotive manufacturer decided that automation was necessary because of the amount of parts and intricate angles and welding positions.

A few tips about welding equipment, MIG and TIG welders, plasma cutters. When appearance counts, TIG welding creates a high quality, clean weld that is far less likely to distort the metal by using a nonconsumable tungsten electrode. There is no need to worry about splatter because it only uses the necessary amount of filler metal needed in the welding puddle, making for the highest quality weld in every respect. However, TIG is fairly specialized and requires a good deal of training in order to master it—so make sure any TIG welder purchase is paired with a plan to take welding classes. Instead of the point and shoot simplicity of MIG welding, TIG requires the use of a foot pedal to regulate the welding process. A filler rod that is separate from the torch that must be fed in gradually. Many professional welders prefer TIG because it can weld a wide variety of metals and because of the versatility of argon gas used during TIG welding. There is no slag to block the view of the weld puddle. Argon gas can weld any metal at any thickness with TIG welding, and therefore there is no need to change the gas depending on the project. Find extra details on here.

USA market pick: Lincoln Electric is an Ohio-based company started all the way back in 1895. For over 120 years, Lincoln has produced some fine quality welders, and the Handy is certainly one of them. At about $300, this welder is a bargain while also offering great results. For around $200 dollars more than the $99 Goplus, users can expect an uptick in overall power and performance. As this Lincoln welder is well known for being both reliable and durable, welders who aren’t expecting an overabundance of power will love this machine. People who have purchased the Lincoln Electric K2185-1 Handy MIG welder remark that it is stable and long-lived even with daily use. The Handy Lincoln welder is able to weld mild steel from 24 gauge up to 1/8 inches thick. It has four output power settings that the user can dial in. The fan cooling system reduces the risk of it overheating.

The Lincoln PowerMIG 210 is the ultimate MIG welder for versatility. It comes with the capability to perform MIG, Stick, TIG and Flux Core welding at both 120v and 240v. This is perfect if you’re looking to buy a MIG welder and are considering buying a TIG or Stick welder as well. Buying a multi-process welder like the PowerMIG 210 can save you a lot of money rather than buying separate machines. Lincoln are the market leaders when it comes to manufacturing quality and the PowerMIG 210 is top of the range to build quality and weld quality. The digital display on the front of the machine lets you easily key in your variables to get you get set up in no time at all with an easy to use user interface. See the full review here.

Best metal buildings company from Havit Steel? We use high-quality steel to design and manufacture steel structure buildings, it ensure the strength of the entire building, and the building structure can withstand harsh weather conditions. Havit Steel designs each of our buildings to withstand heavy snow and high wind speeds at your location. Metal buildings can use high-quality insulation materials to achieve high energy efficiency. The insulation materials fill in walls and roofs, and the exterior covered with a corrugated metal sheet, which with a variety of color options, the board is healthy and beautiful.

Compared with traditional livestock buildings, steel livestock buildings have the functions of heat preservation, moisture retention, ruggedness, wind and rain resistance, and it does not occupy our cultivated land. It is more convenient to install and remove them. Besides, we can also configure automatic curtains and some automatic feed feeders in mobile homes. The modern livestock building can make the current breeding industry develop rapidly. Six reasons why choose Havit steel for your steel livestock buildings.

The frame structure can provide ample internal space, make the layout of the building flexible, and is suitable for various types of utility functions. The steel structure is lightweight, excellent seismic performance, fast construction speed, and a high degree of mechanization. The steel frame structure has extensive use of space and a flexible layout. It widely used in public buildings, such as the multi-story industrial workshop building, multi-story residential buildings and office buildings, and multi-story hotels. Or some hospital’s inpatient buildings, school buildings, shopping malls. The construction of the frame structure is simple, the installation is also convenient, and the materials are sturdy and durable. See even more info on steel structure building.

The steel structure has excellent performance and high reliability. Steel is uniform, isotropic. It has a large elastic modulus, good plasticity and toughness. And is an ideal elastic-plastic body. Therefore, the steel structure will not suddenly break and break due to accidental or local overload. It can adapt to vibration loads. The calculation model reflects the mechanical properties of the steel, so the analysis is accurate and reliable. The speed of steel structure construction is about 50% faster than that of concrete structure, which will save a lot of time and cost; the overall weight of steel structure is more than 50% lighter than that of specific construction, and the cost of foundation and transportation will decrease.

After more than ten years of development, Havit Steel has accumulated considerable experience. We have rich experience in steel structure engineering, manufacturing, and installation. From the project start to construction completion, we provide one-stop solutions. Our professional services help customers reduce overall costs and complete projects quickly. We offer a range of services, including Budget and planning, detailed design, procurement services, and project construction management, to meet all customer needs. Discover additional details on Steel Workshop Building.

Aluminum foil recycling recommendations? If it is even remotely possible that any man-made item on Earth is more ubiquitous than plastic bags, it would have to be aluminum cans. But unlike plastic bags, which endanger marine life and trash the planet, aluminum cans are actually good for the environment. At least, they are if people like you and me take the time to recycle them. So why recycle aluminum? Well, as a starting point for answering that question, how about this: Aluminum recycling provides many environmental, economic and community benefits; it saves energy, time, money and precious natural resources; and it generates jobs and helps to pay for community services that make life better for millions of people.

Keep in mind that several food products come with aluminum foil attached. Many yogurt containers have aluminum foil over the lids. K-cups also have aluminum foil lids. If you can recycle sheets of aluminum foil, chances are high you can recycle these items as well. Check with your recycling company to see if they can take other types of clean aluminum food storage products, like pie pans and turkey roasters, too. I reuse my clean aluminum foil whenever possible. Pieces with absolutely no food on them get folded up and put in the fridge until I need them next time. Pieces with food on them stay on my large pan until I am ready to put leftovers on a smaller plate. At that point, the foil can still be used to cover the plate.

If you’re recycling aluminum foil that you bought and used for storage, separate the foil from the paperboard box and corrugated tube before recycling. If foil is combined with other materials (such as in drink boxes, candy wrappers and yogurt tops) and can’t be separated, you’ll want to throw it away. Foil mixed with other materials is considered recycling contamination. Combine all sheets of foil into one ball. This will keep the material easily separated from other products, and also prevent it from blowing away (aluminum foil is a very light material). Discover even more details at is foil recyclable.

While most recycled aluminum is in the form of cans, aluminum foil is technically recyclable, but there’s a catch: It needs to be clean — that is, free of food residue, as grease or food residue can contaminate the other recyclables during the recycling process. In part because of the issues with contamination, and the reality that most people are unlikely to rinse their aluminum foil before recycling it, some waste haulers will not accept aluminum foil for recycling; the damage soiled aluminum foil does to other recyclables can outweigh the benefit of trying to recycle the aluminum foil.

The global demand for aluminum, however, continues to increase. Manufacturers currently use about 35 percent of recovered aluminum and about 65 percent of primary aluminum to meet their needs. While Americans recycled 57.4 percent of aluminum in 2009, the industry has a self-imposed goal of a 75 percent recycling rate. By working with local communities, authorities and society as a whole, the aluminum industry is hoping to encourage more recycling in order to satisfy increased demand. See additional information at https://www.ablison.com/how-to-recycle-aluminum-foil-and-is-it-biodegradable/.

Gold company Idaho with BondResources? There is risk associated with every investment, and the savvy investor will mitigate those risks with a well diversified investment strategy. If you are looking for a low risk investment that will buffer your retirement against inflation, then we suggest you strongly consider adding precious metals to your investment portfolio. If you are interested in making physical precious metals your next investment, Provident Metals has what you are looking for. Whether silver, gold or another form of precious metal, we offer the bars, rounds and coins for any size investment.

Test mining will determine if the observed average bulk sample grades of 0.6 opt gold are consistent along the entire strike length of the Mary K Vein at surface. The potential quantity and grade is conceptual in nature, there has been insufficient exploration to define a mineral resources and it is uncertain if further exploration will result in the target being delineated as a mineral resource. A 500 lbsample from surface returned 0.79 ounce per ton.A 2 Kg sample from surface sent to theBureau Veritas laboratory in Richmond, B.C. returned 44.3 g/t with a combined gravity and flotation recovery of 96.3%.

The Elk City area sits in a metamorphic complex that is adjacent to the Idaho Batholith. All the large veins trend east-west and are anywhere from 500 to 3,000 feet long.They are en-echelon, meaning they look like rungs of a ladder when looking from above. While the company believes the historical sampling data shown in the map is reliable, readers are cautioned that a qualified person has not completed sufficient work to be able to verify the historical information and therefore the information should not be relied upon.

The Mary K mine was first staked on Jan 11908 by Maxwell and Williams.They sunk two shafts and dug cuts along the vein for 3,000 feet.Richard Kleesattel, a mining engineer, picked the mine up in 1915 and began expanding the underground workings.Between 1929 and 1942 Mr. Kleesatteldeveloped at least 2,400 feet of underground workings.The longest is the #4 Level, or Main Access, which is over 2,000 ft long,1,100 ft of it were in high-grade gold mineralization. See additional info at gold investing US.

Gold retains its value not only in times of financial uncertainty, but in times of geopolitical uncertainty. It is often called the “crisis commodity,” because people flee to its relative safety when world tensions rise; during such times, it often outperforms other investments. For example, gold prices experienced some major price movements this year in response to the crisis occurring in the European Union. Its price often rises the most when confidence in governments is low.

Mr. Carrabba is a mining executive with over 42 years of management and operational experience in the resource industry. He has served on boards of several listed companies including Newmont Mining, Key Bank, Lithium-X and Fura Gems. Mr. Carrabba is currently an active board member on NYSE-listed Timken Steel as well as TSX-listed AECON and NioCorp. Read more information on https://bondresources.ca/.

Encore’s single column overhead machine designs allow customers to view the process from the safety of the cleanroom. Dual columns have limited visibility requiring the process to be viewed from inside the booth. Blow-off: Using Encore engineered and designed standard machines and robot mounted assemblies Encore offers an extensive assortment of custom blow off systems for a wide variety of vehicle and product sizes. Blow off systems typically fan driven, electro-statically charged, to remove dirt and foreign particles from the surface of parts prior to painting. There are a variety of options on blow off systems, including: Stationary (fixed) or Machine/Robotic. Machine configurations are of various sizes and complexities, High/low volume, high/low velocity air, Compressed or fan driven air, PC based or PLC based visualization systems, PLC based with PC or Panel view Graphical User Interfaces, Clean Wall or In-booth Design, Vacuum collection and/or booth collection of dirt.

TKS Industrial has acquired Encore Automation, a leader in Automation and Robot Integration in the Automotive and Aerospace industries. We design our robot paint systems to provide the most efficient painting process within a spec’d time frame to determine the optimal number of required robots. Every paint shop is different. TKS offers each paint system as an independent module, so each customer can mix and match to meet their requirements. We specialize in providing custom designs & custom engineering for each client for each vehicle. We are a full-service design-build industrial contractor.

With proprietary in-house engineering, simulation, and design capabilities, TKS can help you choose tank lengths, conveyor speed, and dip angles to meet your company’s requirements. TKS has a patented counterflow design circulation system for Electro-deposition (ED) tanks. Rather than a traditional eddy swirling, which kicks up dirt from the bottom of the tank, our Counter-flow technology moves the entire ED current in one direction, from exit to entry. At vehicle entry the e-coat paint / UF water mixture is pulled through a UF filter module, and pumped back to the end of the tank. This ensures that the last layers of ED coating are the cleanest. Read additional info on https://www.tksindustrial.com/electric-vehicles-EV-paint.

TKS provides superior spray booth environments to achieve a high-quality paint finish with a wet or dry scrubber. We have recently updated our Dry Booth design to reduce maintenance and decrease operating costs via less limestone and less energy usage. Our wet booth scrubbers has been installed over 100 times worldwide.

All four major ovens: E-coat oven, Sealer oven, (optional) Primer oven, and Topcoat oven all consist of heat-up and hold zones. In a 3-wet paint booth process arrangement, there isn’t a Primer oven, instead a heated flash off (HFO) is used. Sometimes there are also smaller ovens for black-out and cavity wax. We offer a paint-drying oven that responds to temperature increases in body areas. The oven design will increase heating in zones of thick parts, such as sill inners or pillars where it is difficult to dry paints, while maintaining the temperature of keep-zones with a minimized flow rate to reduce dirt contamination and reduce energy usage.

TKS Industrial Company is a world class designer and builder of Paint Finishing Systems and Pollution Abatement Systems for the automotive and related industries. We are dedicated to continually provide our customers with products and services of only the highest possible quality. Read more information on Tks paint system.